Water Butterfly valves Elephant WBV3131S-2W-C-H, body material - stain – Valve Elephant
Elephant  |  SKU: D050-73005

Water Butterfly valves Elephant WBV3131S-2W-C-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-DA-052 double action, 4V320-10 220V, LSU APL-410N EX, ATU AFC2000

€362,32
inkl. MwSt. Versand wird beim Checkout berechnet.

Lieferung und Versand

Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.

Wenn Sie Fragen zu unseren Produkten, Lieferoptionen oder anderen Themen haben, zögern Sie nicht, uns zu kontaktieren.

Beschreibung

Butterfly valves are designed for use as shut-off or regulating valves for controlling flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. Operating principle: The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise.

Pneumatic double-acting rotary actuators PA-DA-XXX and pneumatic rotary actuators with return spring PA-SA-XXX are designed for automation of industrial valve control process with maximum torque up to 2128 Nm.

Pneumatic valves are used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

Limit switch unit is an electrical device designed for opening and closing of the working circuit and for visualization of the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Thanks to its use, it is possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

The air treatment unit is designed to clean compressed air from moisture and solid particles, remove condensate, automatically maintain the pressure at the preset level, supply lubricant from the tank in the compressed air flow to the pneumatic system elements.

 

 

Technical parameters of Water Butterfly valves Elephant WBV3131S-2W-C-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-DA-052 double action, 4V320-10 220V, LSU APL-410N EX, ATU AFC2000:

Characteristic meaning
Gate type rotary disk
Diameter 15-100 mm
Nominal pressure 10 bar
Working medium temperature -50 to +180°C
Application Food industry
Connection type clamp
Control type pneumatic actuator
Sealing class A
Manufacturer's country China
Warranty 12 months.

Butterfly valves WBV3131S-2W-C-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-DA-052 double action, 4V320-10 220V, LSU APL-410N EX, ATU AFC2000

 

 

Dimensions and dimensions of butterfly valves Elephant WBV3131S-2W-C-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-DA-052 double action, 4V320-10 220V, LSU APL-410N EX, ATU AFC2000:

Diameter D, mm D1, mm A, mm H, mm J, mm K, mm
DN15 34 78 66 86 126 8x8
DN20 34 78 66 86 126 8x8
DN25 50.5 78 66 86 126 8x8
DN32 50.5 86 66 90 126 8x8
DN40 50.5 90 70 92 126 8x8
DN50 64 106 76 104 133 10x10
DN65 91 124 80 113 144 10x10
DN80 106 139 84 123.5 160 10x10
DN100 119 159 104 133.5 160 10x10

Sketch Butterfly valves WBV3131S-2W-C-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-DA-052 double action, 4V320-10 220V, LSU APL-410N EX, ATU AFC2000

 

 

Materials of butterfly valves Elephant WBV3131S-2W-C-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-DA-052 double action, 4V320-10 220V, LSU APL-410N EX, ATU AFC2000:

№ Part Name Material
1 Body Stainless steel AISI 304
2 Rotary assembly Stainless steel AISI 304
3 Disc Stainless steel AISI 304
4 Seat seal EPDM or Silicon
5 Nut Steel A2~70
6 Bolt Steel A2~70
7 Plug ABS plastic
8 Handle Stainless steel AISI 304

Sketch of parts and materials Butterfly valves WBV3131S-2W-C-H, body material - stainless steel AISI 304, seal - Silicon, with pneumatic actuator PA-DA-052 double action, 4V320-10 220V, LSU APL-410N EX, ATU AFC2000

 

 

Technical data of DA double-acting pneumatic actuators:

Type of pneumatic actuator DA - double-acting
Nominal pressure PN, bar 12
Working pressure, bar 2...8
Working medium filtered compressed air
Maximum particle diameter of the working medium, µm2 ≤30
Ambient temperature, ⁰C -20 to +80
Swivel angle, ° 0 - 90
Swivel angle adjustment, % ±5
Position indicator open/closed
Top connection standard NAMUR
Air connection standard NAMUR
Average life, cycles closed/open 70 000 (for non-aggressive media and medium pressure and temperature values)


DA pneumatic actuators double-acting rotary actuators

 


Dimensions and mounting dimensions of DA double-acting pneumatic actuators:

Model A, mm B, mm C, mm D, mm E, mm F, mm G, mm H, mm
PA-x-052 30 41,5 65,5 72 92 65 30 80
PA-x-065 36 47 81 88 108 72 30 80
PA-x-083 46 57 98,5 108,7 128,7 92 30 80
PA-x-105 57,5 64 122,5 133 153 109,5 30 80
PA-x-130 67,5 74,5 145,5 155 185 127,5 30 130
PA-x-140 75 77 161 172 202 137,5 30 130
PA-x-160 87 87 184 197 227 159 30 130
PA-x 210 113 113 235,5 255 285 210 30 130
PA-x-270 147 147 299 326 356 273 30 130
PA-x-300 162 174 330 350 380 312 30 130
PA-x-350 190 195 483 410 440 365 30 130

 

Model I, mm J, mm M, mm N, mm Z, mm d, mm K L
PA-x-052 36 50 11x11 14 147 40 M5x8 M6x10
PA-x-065 50 70 14x14 18 168 40 M6x10 M8x13
PA-x-083 50 70 17x17 21 204 40 M6x10 M8x13
PA-x-105 70 102 22x22 26 268 40 M8x13 M10x16
PA-x-130 70 102 22x22 26 301 55 M8x13 M10x16
PA-x-140 102 125 27x27 31 390 55 M10x16 M12x20
PA-x-160 102 125 27x27 31 458 55 M10x16 M12x20
PA-x-210 - 140 36x36 40 532 80 - M16x25
PA-x-270 - 165 46x46 50 718 80 - M20x25
PA-x-300 - 165 46x46 50 760 80 - M20x25
PA-x-350 165 254 46x46 50 920 80 M20x25 8xM16x25

Sketch of dimensions of DA double-acting pneumatic actuators

 

 

Materials of parts for DA double-acting pneumatic actuators:

№ Part name Material
1 Indicator screw ABS plastic
2 Position indicator ABS plastic
3 Spring clip stainless steel 304
4 Metal washer stainless steel 304
5 Pressure washer engineering plastic
6 Housing hard anodized extruded aluminum alloy
7 Pressure washer engineering plastic
8 Limiter alloy steel
9 Shaft sealing ring upper NBR
10 Upper shaft sliding ring engineering plastic
11 Shaft nickel plated alloy steel
12 Shaft sliding ring lower engineering plastic
13 Shaft O-ring lower NBR
14 Plug NBR
15 Seal ring of adjusting screws NBR
16 Washer of adjusting screw stainless steel 304
17 Lock nut of adjusting screw stainless steel 304
18 Adjusting screw stainless steel 304
19 Piston die-cast aluminum alloy
20 Piston guide plate engineering plastic
21 Piston sliding ring engineering plastic
22 Piston O-ring NBR
23 Spring set spring steel
24 Cover O-ring NBR
25 End cap cast aluminum with polyester coating
26 Cover screw stainless steel 304
27 Stop screw stainless steel 304
28 Adapter carbon steel

Material sketch of DA double-acting pneumatic actuators

 

 

Technical parameters of pneumatic valve 4V320-10 220V:

Name meaning
Type of pneumatic valve slide valve
Working pressure, bar 1.5 ÷ 8
Supply voltage, V 220 V
Total power, Va 4.5
Control double-sided electromagnetic
Frequency of operation, cycle/sec 5

Pneumatic valve 4V320-10 220V

 

 

Dimensions and dimensions of pneumatic valve 4V320-10 220V:

Pneumatic valve model 4V320-10
A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4
H, mm 82.4

Sketch of dimensions and dimensions of pneumatic valve 4V320-10 220V

 

 

Technical parameters of limit switch unit APL-410N EX:

Name Value
Model of limit switch unit APL-410N EX
Maximum voltage of limit switch, V 250
Working environment temperature, °C -40 to +80
Service life, years 10

Limit switch unit APL-410N EX

 

 

Dimensions and dimensions of limit switch unit APL-410N EX:

A, mm 177
B, mm 174
C, mm 178
D, mm 101
E, mm 76
F, mm 57
G, mm 55
H, mm 23
I, mm 27
J, mm 3
K, mm 4
d1, mm 5
d2, mm 9.5

Sketch of dimensions and dimensions of limit switch unit APL-410N EX

 

 

Materials of parts of APL-410N EX explosion-proof limit switch units:

№ Name Material Quantity
1 Visual indicator ABS plastic / polycarbonate 1
2 Visual indicator cover polycarbonate 1
3 Label - 1
4 Screws of BCV cover stainless steel 8
5 Cover of BCB housing aluminum die casting 1
6 Shaft stainless steel 1
7 Limit switches - 2
8 Cams (eccentrics) polycarbonate 2
9 BCB housing aluminum die casting 1
10 Terminal block - 1
11 Ground terminal stainless steel 1
12 Cable entry hole (thread) - 2
13 Bracket stainless steel 1

Sketch of APL-410N EX explosion-proof limit switch units

 

 

Main parameters of the AFC2000 air treatment unit:

Operating pressure, bar 8
Maximum pressure, bar 10
Adjustable pressure range, bar 0,5 ÷ 9
Breaking pressure, bar 15
Air connection 1/4”
Operating temperature, C -5 to +60
Filter particle size, µm 40
Oil viscosity ISO VG 32
Weight, kg 0,395
Set composition filter-moisture separator, pressure regulator, lubricator, bracket

Air treatment unit AFC2000

 

 

Overall and installation dimensions of AFC2000 air treatment units:

A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5

Sketch of dimensions of AFC2000 air treatment units

Spezifikation
  • Herkunftsland
    China
  • Körpermaterial
    Edelstahl AISI 304
  • Maximal zulässige Temperatur
    180 °C
  • Verbindungstyp
    Klemme
  • Steuerungstyp
    Pneumatischer Antrieb
  • Betriebsumgebung
    Wasser, Dampf, Lebensmittelumgebung, Neutrale Medien
  • Anwendungen
    Lebensmittelindustrie
  • Nenn­druck
    10 bar
  • Typ der Dichtung
    Silizium
  • Sperrmaterial
    Edelstahl AISI 304
  • Manuelle Übersteuerung
    NEIN
  • Endschalter
    Ja
  • Versorgungsspannung
    220V
  • Aktuatorenmodell
    PA-DA-052
  • Typ des pneumatischen Antriebs
    Doppelwirkung

Bewertungen (0)

Dokumentation
nullPneumatic valve ELEPHANT 4V320-8 or 10 AC220V
nullButterfly valve Elephant WBV3131x-2W-C-H DN15-100 10 bar food grade stainless steel connection CLAMP with handle
nullPneumatic rotary actuator ELEPHANT PA-x-x double-acting and with return springs

Zahlung & Sicherheit

Zahlungsmethoden

    Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite

    Verfügbare Varianten

    SKUAnschlussgrößeDruckPreis VerfügbarkeitAnzahl In den Warenkorb
    D050-73005DN1510 bar €362,32 Ausverkauft
    D050-73006DN2010 bar €363,10 Ausverkauft
    D050-73007DN2510 bar €363,10 Ausverkauft
    D050-73008DN3210 bar €363,62 Ausverkauft
    D050-73009DN4010 bar €367,01 Ausverkauft
    D050-73010DN5010 bar €381,00 Ausverkauft
    D050-73011DN6510 bar €431,61 Ausverkauft
    D050-73012DN8010 bar €436,48 Ausverkauft
    D050-73013DN10010 bar €442,58 Ausverkauft

    Häufig gestellte Fragen

    Versand

    In welche Länder liefern Sie?

    Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.

    Wie lange dauert es, bis ich meine Bestellung erhalte?

    Standardversand dauert normalerweise 3-7 Tage. Versand am nächsten Tag ist für alle Inlandsbestellungen verfügbar (gegen Aufpreis). Die Versandzeiten für internationale Bestellungen hängen von den Produkten und dem Zielort ab (geschätzt beim Checkout).

    Rücksendungen und Rückerstattungen

    Wie gebe ich ein Produkt zurück?

    Artikel müssen innerhalb von 30 Tagen nach Erhalt Ihrer Bestellung zurückgegeben werden. Die Artikel müssen sich in demselben Zustand befinden, in dem sie empfangen wurden, ungetragen/unbenutzt sein, alle Etiketten müssen noch angebracht sein und die Originalverpackung muss vollständig enthalten sein.

    Wie lange dauert es, bis ich meine Rückerstattung erhalte?

    Rückerstattungen werden innerhalb von 7 Tagen bearbeitet, nachdem wir den/die Artikel erhalten haben.