Vanne papillon d'eau Elephant WBV1331E-2W-FH, matériau du corps - Fonte GGG40/EN-GJS-400-15, matériau du disque - Acier inoxydable AISI 304, joint - EPDM, actionneur pneumatique PA-DA double action, BKV APL-410N EX, volant MON
Vanne papillon d'eau Elephant WBV1331E-2W-FH, matériau du corps - Fonte GGG40/EN-GJS-400-15, matériau du disque - Acier inoxydable AISI 304, joint - EPDM, actionneur pneumatique PA-DA double action, BKV APL-410N EX, volant MON - DN100 / 16 bars ist auf Lager und wird versandt, sobald es wieder verfügbar ist
Verfügbarkeit für Abholungen konnte nicht geladen werden
Lieferung und Versand
Lieferung und Versand
Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.
Beschreibung
Beschreibung
The WBV1331E-2W-F butterfly valve is designed for use as shut-off or regulating valves for controlling flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise. Pneumatic rotary actuators are designed for automation of industrial valves control process. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Limit switch unit is an electrotechnical device designed for opening and closing of the working circuit and for visualization of positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Thanks to the use of the BCV it Weightomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.
Manual doubleturn actuator with worm gear and MON reduction gearbox allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.
Technical parameters of Water Butterfly Valve Elephant WBV1331E-2W-F-H, body material - Cast iron GGG40/EN-GJS-400-15, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-DA double action, LSU APL-410N EX, handwheel MON:
Characteristic | meaning |
Gate type | rotary disk |
Diameter | 50-200 mm |
Nominal pressure | 16 bar |
Working medium temperature | -25 to +130°C |
Application | water supply, industry, heating systems |
Connection type | flanged |
Control type | pneumatic actuator |
Sealing class | A |
Manufacturer's country | China |
Service life | 10 years |
Warranty | 12 months. |
Butterfly valves WBV1331E-2W-F-H, body material - Cast iron GGG40/EN-GJS-400-15, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-DA double action, LSU APL-410N EX, handwheel MON
Dimensions and dimensions of butterfly valves Elephant WBV1331E-2W-F-H, body material - Cast iron GGG40/EN-GJS-400-15, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-DA double action, LSU APL-410N EX, handwheel MON:
Diameter | L, mm | D, mm | D1, mm | D2, mm | n-d, mm |
DN50 | 108 | 165 | 125 | 99 | 4-18 |
DN65 | 112 | 185 | 145 | 118 | 4-18 |
DN80 | 114 | 200 | 160 | 132 | 8-18 |
DN100 | 127 | 220 | 180 | 156 | 8-18 |
DN125 | 140 | 250 | 210 | 184 | 8-18 |
DN150 | 140 | 285 | 240 | 211 | 8-22 |
DN200 | 152 | 340 | 295 | 266 | 12-22 |
DN250 | 165 | 405 | 355 | 319 | 12-26 |
DN300 | 178 | 460 | 410 | 370 | 12-26 |
Sketch Butterfly valves WBV1331E-2W-F-H, body material - Cast iron GGG40/EN-GJS-400-15, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-DA double action, LSU APL-410N EX, handwheel MON
Materials of butterfly valves Elephant WBV1331E-2W-F-H, body material - Cast iron GGG40/EN-GJS-400-15, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-DA double action, LSU APL-410N EX, handwheel MON:
№ | Part name | Material |
1 | Body | cast iron GGG40 |
2 | Disk | stainless steel 304 |
3 | Seat seal | EPDM |
4 | Stem | stainless steel SS 420 |
5 | Handle | GGG40 cast iron |
Sketch of parts and materials Butterfly valves WBV1331E-2W-F-H, body material - Cast iron GGG40/EN-GJS-400-15, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-DA double action, LSU APL-410N EX, handwheel MON
Technical data of PA-DA pneumatic actuators:
Design | Double action |
Nominal pressure PN, bar | 12 |
Working pressure, bar | 2...8 |
Working medium | Filtered compressed air or non-aggressive gases, oils |
Maximum particle diameter | less than 30 µm2 |
Operating temperature t, ⁰C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
Manual override | is |
Position indicator | open/closed |
Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
PA-DA pneumatic actuator
PA-DA pneumatic actuator component materials:
№ | Name | Material |
1 | Enclosure | extruded aluminum |
2 | Side plugs | cast aluminum |
3 | Gear | stainless steel |
4 | Piston | steel/aluminum |
5 | Plugs | stainless steel |
6 | Piston ring | NBR |
7 | Springs | spring steel |
8 | Piston bearing | engineering plastic |
9 | Piston ring | NBR |
10 | Plug | NBR |
11 | Thrust ring | engineering plastic |
12 | Ring | engineering plastic |
13 | Washer | stainless steel |
14 | Spring clip | stainless steel |
15 | Indicator | plastic |
16 | Indicator housing | plastic |
17 | Bearing | engineering plastic |
18 | Cam | steel |
19 | Bearing | NBR |
20 | Bearing | engineering plastic |
21 | Bearing | engineering plastic |
22 | Sealing ring | NBR |
23 | Sealing ring | NBR |
24 | Bearing | stainless steel |
25 | Adjustment nut | stainless steel |
26 | Adjustment screw | stainless steel |
27 | Sleeve | aluminum |
Parts and material sketch of the PA-DA pneumatic actuator
Technical parameters of the handwheel MON:
Name | Value |
Climatic version | U,UHL,T,OM |
Degree of protection, IP | 67 |
Connection type | ISO 5211 |
Manual doubler MON
Dimensions and dimensions of the handwheel MON:
Model | MON1-250-T26-ISO | MON2-450-T28-ISO | MON3-700-T38-ISO | MON4-1200-T54-ISO |
b1, mm | 14 | 17 | 22 | 27 |
N, mm | 22 | 22 | 28 | 32 |
b2, mm | 14 | 17 | 22 | 27 |
M, mm | 16 | 18 | 22 | 30 |
D1, mm | Ø50 | Ø70 | Ø102 | Ø102 |
4-M1, mm | 4-M6 | 4-M8 | 4-M10 | 4-M10 |
D2, mm | Ø70 | Ø102 | Ø125 | Ø125 |
4-M2, mm | 4-M8 | 4-M10 | 4-M12 | 4-M12 |
E, mm | 70x70 | 95x95 | 114x114 | 129x129 |
D3, mm | Ø50 | Ø70 | Ø102 | Ø125 |
4-Ø1, mm | 4-Ø6.5 | 4-Ø8.5 | 4-Ø10.5 | 4-Ø12.5 |
D4, mm | Ø70 | Ø102 | Ø125 | Ø140 |
4-Ø2, mm | 4-Ø8.5 | 4-Ø10.5 | 4-Ø12.5 | 4-Ø16.5 |
A, mm | 90 | 125 | 140 | 188.5 |
B, mm | 55 | 64 | 71 | 93 |
ØC, mm | Ø88 | Ø110 | Ø129 | Ø174 |
F, mm | 115 | 135 | 166 | 202 |
T, mm | 44 | 62.5 | 70 | 94 |
Y, mm | 145 | 178 | 212 | 280 |
H, mm | 120 | 133 | 180 | 195 |
S, mm | 53 | 56.5 | 68.7 | 84 |
K, mm | 10 | 13 | 12.5 | 15 |
Ø hand wheel, mm | 180 | 200 | 280 | 320 |
Sketch of dimensions and dimensions of the MON handwheel MON
MON handwheel materials:
№ | Name | Material |
1 | Stem for mounting the pneumatic actuator | Steel 45 |
2 | Sealing ring | EPDM |
3 | Fixing spring | Spring steel |
4 | Upper end cover | Aluminum alloy |
5 | Screw | Steel 304 |
6 | Locking bracket (main rod) | Steel 304 |
7 | Housing | Aluminum alloy |
8 | Sealing ring | EPDM |
9 | Gear unit | Cast iron BCh50 |
10 | Transition coupling | Cast iron BCh40 |
11 | Gear stem | Cast iron BCh40 |
Materials of the handwheel
Technical parameters of limit switch unit APL-410N EX:
Name | Value |
Model of limit switch unit | APL-410N EX |
Maximum voltage of limit switch, V | 250 |
Working environment temperature, °C | -40 to +80 |
Service life, years | 10 |
Limit switch unit APL-410N EX
Dimensions and dimensions of limit switch unit APL-410N EX:
Model | D, mm | D1, mm | H, mm | L, mm | B, mm | M, mm |
APL-410N EX | 9.5 | 5 | 174 | 177 | 178 | 8 |

Sketch of dimensions and dimensions of limit switch unit APL-410N EX
Bewertungen (0)
Bewertungen (0)
Documentation
Documentation
Zahlung & Sicherheit
Zahlungsmethoden
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite
Häufig gestellte Fragen
Versand
In welche Länder liefern Sie?
In welche Länder liefern Sie?
Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.
Wie lange dauert es, bis ich meine Bestellung erhalte?
Wie lange dauert es, bis ich meine Bestellung erhalte?
L'expédition standard prend normalement 3 à 7 jours. L'expédition le lendemain est disponible pour toutes les commandes nationales (moyennant des frais supplémentaires). Les délais d'expédition internationaux dépendent des produits et de la destination (estimés au moment du paiement).
Retours et remboursements
Comment retourner un produit ?
Comment retourner un produit ?
Les articles doivent être retournés dans les 30 jours suivant la réception de votre commande. Les articles doivent être retournés dans le même état dans lequel ils ont été reçus, ne pas être portés/utilisés, avoir toutes les étiquettes encore attachées et inclure tous les emballages d'origine.
Combien de temps faudra-t-il pour recevoir mon remboursement ?
Combien de temps faudra-t-il pour recevoir mon remboursement ?
Les remboursements sont traités dans les 7 jours suivant la réception des articles.