Water Butterfly Valve Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disc - stainless steel 304, seal - EPDM, with pneumatic actuator PA-DA-105-1, with pneumatic distributor 4V320-08 220V
Water Butterfly Valve Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disc - stainless steel 304, seal - EPDM, with pneumatic actuator PA-DA-105-1, with pneumatic distributor 4V320-08 220V - DN50 / 16 bar ist auf Lager und wird versandt, sobald es wieder verfügbar ist
Verfügbarkeit für Abholungen konnte nicht geladen werden
Lieferung und Versand
Lieferung und Versand
Die Lieferkosten werden während des Bestellvorgangs festgelegt und variieren je nach mehreren Faktoren, einschließlich Produkttyp, Lieferzeit, Dienstleister und Zielland.
Beschreibung
Beschreibung
Elephant WBV1331E-2W-F-H butterfly valves are designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
Pneumatic valve Elephant 4V320-08 220V is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.
The Elephant APL-510N EX limit switch unit is an electrical device designed to open and close the working circuit and to visualise the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalise extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-coloured visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labelled CLOSED is visible; if it is open, only the yellow part labelled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the colour difference between the open and closed position reduces the probability of misinterpretation of information. The use of the AFC2000 makes it possible to transmit information on the position of the valve (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.
The AFC2000 air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain pressure at a preset level, supply lubricant from the tank to the compressed air flow to the pneumatic system elements with a large capacity range from 500 litres/minute to 10,000 litres/minute. The lubricator (oil atomiser) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic valves.
Technical parameters Rotary disc gate valves Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disk - stainless steel 304, seal - EPDM
Name | Value |
---|---|
Nominal pressure PN, bar | 16 |
Operating temperature, °C | from -25 to 130 |
Application | water supply, industry, heating systems |
Pipe connection | flanged |
Valve type | rotary disc |
Control type | pneumatic drive |
Country of manufacture | China |
Dimensions and dimensions of Butterfly valves Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disk - stainless steel 304, seal - EPDM
DN | L | D | F | L1 |
50 | 108 | 125 | 153 | 495 |
65 | 112 | 145 | 153 | 495 |
80 | 114 | 160 | 153 | 495 |
100 | 127 | 180 | 153 | 495 |
Sketch of rotary disc gate valves Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disk - stainless steel 304, seal - EPDM
Table of parts and materials for butterfly disc gate valves Elephant WBV1331E-2W-F-H, flanged, body - cast iron GGG40, disk - stainless steel 304, seal - EPDM
No. | Part Name | Material |
---|---|---|
1 | Body | cast iron GGG40 |
2 | Disk | stainless steel 304 |
3 | Saddle sealing | EPDM |
4 | Stem | stainless steel SS 420 |

Technical parameters of pneumatic actuator PA-DA-105-1:
Type of pneumatic actuator | double-acting |
Control pressure, bar | 2 ÷ 8 |
Operating temperature, °C | -20 to +80 |
Visual position indicator | open / closed |
Manual control | handwheel |
Swivel angle, ° | 90 ± 5 |
Top connection standard | NAMUR |
Air connection standard | NAMUR |
Air supply connection thread | G 1/4ʺ |
ISO flange type | F07/F10 |
Stem square, mm | 22x22 |
Weight, kg | 9 |
Average life, cycles closed/open | 300 000 |
Pneumatic actuator PA-DA-105-1
Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:
A, mm | 495 |
A1, mm | 461.5 |
B, mm | 133 |
C, mm | 109.5 |
D, mm | 153 |
E, mm | 57.5 |
F, mm | 64 |
G, mm | 26 |
H, mm | 80 |
I, mm | 30 |
N, mm | 22 |
W, mm | 200 |
J, mm | 102 |
K, mm | 70 |
L, mm | M10x16 |
M, mm | M8x13 |
O, mm | 4 |
P, mm | 4 |
S, mm | M6 |
T, mm | 24 |
U, mm | 32 |
Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1
PA-DA-105-1 air actuator parts and materials table:
№ | Part name | Material |
1 | Indicator screw | ABS (plastic) |
2 | Position indicator | ABS (plastic) |
3 | Spring clip | Stainless steel 304 |
4 | Washer | Stainless steel 304 |
5 | External washer | Engineering plastic |
6 | Adjustment screw | Stainless steel 304 |
7 | Nut | Stainless steel 304 |
8 | Washer | Stainless steel 304 |
9 | Body | Extruded aluminum alloy |
10 | Piston | Die cast aluminum alloy |
11 | Piston O-ring | NBR |
12 | Bearing group | Engineering plastic |
13 | End cap O-ring | NBR |
14 | End cap | Die cast aluminum alloy coated with polyester paint |
15 | Fixing screw | Stainless steel 304 |
16 | Internal washer | Engineering plastic |
17 | Sealing ring | NBR |
18 | Bearing | Engineering plastic |
19 | Retainer | Alloy steel |
20 | Gear | Alloy steel |
21 | Bearing | Engineering plastic |
22 | Sealing ring | NBR |
Parts and material sketch of the PA-DA-105-1 pneumatic actuator
Technical parameters of pneumatic valve Elephant 4V320-08 220V
Name | Value |
---|---|
Type of pneumatic distributor | Spool type |
Model of pneumatic distributor | 4V320-08 220V |
Operating pressure, bar | 1.5 ÷ 1.8 |
Supply voltage, V | 220 V |
Switching frequency, cycle/sec | 5 |
Bewertungen (0)
Bewertungen (0)
Zahlung & Sicherheit
Zahlungsmethoden
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.ShareRewrite
Häufig gestellte Fragen
Versand
In welche Länder liefern Sie?
In welche Länder liefern Sie?
Wir bieten derzeit Versand innerhalb Frankreichs und in der gesamten EU sowie internationale Versandoptionen an. Wenn Sie ein bestimmtes Ziel im Sinn haben, das nicht aufgeführt ist, zögern Sie bitte nicht, uns für weitere Informationen zu kontaktieren.
Wie lange dauert es, bis ich meine Bestellung erhalte?
Wie lange dauert es, bis ich meine Bestellung erhalte?
L'expédition standard prend normalement 3 à 7 jours. L'expédition le lendemain est disponible pour toutes les commandes nationales (moyennant des frais supplémentaires). Les délais d'expédition internationaux dépendent des produits et de la destination (estimés au moment du paiement).
Retours et remboursements
Comment retourner un produit ?
Comment retourner un produit ?
Les articles doivent être retournés dans les 30 jours suivant la réception de votre commande. Les articles doivent être retournés dans le même état dans lequel ils ont été reçus, ne pas être portés/utilisés, avoir toutes les étiquettes encore attachées et inclure tous les emballages d'origine.
Combien de temps faudra-t-il pour recevoir mon remboursement ?
Combien de temps faudra-t-il pour recevoir mon remboursement ?
Les remboursements sont traités dans les 7 jours suivant la réception des articles.